Sound quality / sound field, Other functions, Optional antenna connections – Panasonic SC-AK320 EN User Manual

Page 15: External unit connections, Using an external unit, Using headphones (not included), Turning the demo function on/off, Sound quality/sound field, 15 optional antenna connections, Enhancing the sound quality

Advertising
background image

RQT7330

15

Optional antenna connections

Use outdoor antenna if radio reception is poor.

FM outdoor antenna

Disconnect the FM indoor antenna.

The antenna should be installed by a competent technician.

AM outdoor antenna

Run a piece of vinyl wire horizontally across a window or other
convenient location.
Leave the loop antenna connected.

Note

Disconnect the outdoor antenna when the unit is not in use.
Do not use the outdoor antenna during an electrical storm.

Other functions

External unit connections

An analog player with a built-in phono equalizer can be connected.

For details, refer to the instruction manual of the units which are to
be connected.

When units other than those described above are to be connected,
please consult your audio dealer.

Using an external unit

(See above for external unit connection.)

1.

Press [AUX].
The unit comes on.

2.

For listening: Proceed to step 3.
For recording: Press [a, REC] (recording starts).

3.

Start playback from the external source. (For details, refer to the
external unit’s instruction manual.)

Using headphones (not included)

Reduce the volume level and connect the headphones.
Plug type: 3.5 mm (

1

/

8

˝) stereo

Note

Avoid listening for prolonged periods of time to prevent hearing damage.

Turning the demo function on/off

When the unit is first plugged in, a demonstration of its functions may
be shown on the display.
If the demo setting is off, you can show a demonstration by selecting
“DEMO ON”.

Press and hold [DISP, –DEMO].

The display changes each time the button is held down.
NO DEMO (off)

↔ DEMO ON (on)

While in the standby mode, select “NO DEMO” to reduce power
consumption.

Note

DEMO function cannot be turned on when Dimmer is on.

Analog player
(not included)

Rear panel of

this unit

(L)

(R)

R

L

Enhancing the sound quality

You can enhance the bass and treble effect of the sound.

Press [SUPER SOUND EQ].

Remote control: Press [S.SOUND EQ].
The button light comes on.
Press the button again to cancel.
The button light goes out.

Adjusting the bass (AK520 and
AK523 only)

Press [SUBWOOFER].

Remote control: Press [SHIFT] + [S.WOOFER].
The button light comes on.

Each time you press the button:
MID (medium)

→ MAX (high) → Light off (off)

To cancel
Press [SUBWOOFER] to turn the light off.
Remote control: Press [SHIFT] + [S.WOOFER].

Note

You cannot use this function when headphones are connected.

Sound quality/sound field

Press [PRESET EQ] to select a setting.

Every time you press the button:

HEAVY

SOFT

CLEAR

EQ-OFF

(cancelled)

DISCO

LIVE

HALL

HEAVY (sound quality) : Adds punch to rock
SOFT (sound quality) : For background music
CLEAR (sound quality): Clarifies higher sounds
DISCO (sound field)

: Produces sound with the same kind of

lengthy reverberations heard at a disco

LIVE (sound field)

: Makes vocals more alive

HALL (sound field)

: Adds an expansiveness to the sound to

produce the atmosphere of a great concert
hall

Note

You cannot use PRESET EQ and SUPER SOUND EQ together.

Using the built-in sound quality/sound
field settings

Other functions

AM outdoor antenna (not included)

AM loop
antenna
(included)

5 -12 m

(

16 – 40 ft.)

Shield braid

Core wire

1

30

mm

(1

3

/

16

)

15

mm

(

19

/

32

)

1

2

3

2

FM outdoor antenna
(not included)

75

Ω coaxial cable (not included)

Shield braid

Core wire

Advertising
This manual is related to the following products: