Panasonic PV DM2092 - Manual (Page 14)

14
For assistance, please call : 1-800-211-PANA(7262) or send e-mail : [email protected]
Plug the unit power cord into an AC wall outlet.
Initial Setup (Ready to Play)
1
3
Press on the remote for TV-VCR mode.
2
• If you use a cable box, turn it on and set it to the Public
Broadcasting Service (PBS) channel in your time zone.
If you use a DSS receiver, it must be turned off.
ACTION
TV-VCR
SELECT
SET
POWER
Initial Setup (Ready to Play)
Please make all cable or antenna connections before powering on.
Press POWER* on the remote or unit. The unit
comes on and auto channel and clock set starts.
CH AUTO SET PROCEEDING
Settings are made automatically.
When setup is done, this screen appears.
PROCEEDING
AUTO CLOCK SET
CANCEL : PRESS STOP KEY
If AUTO CLOCK SET IS INCOMPLETE
screen appears, set the clock using MANUAL
CLOCK SET procedure on next page.
2 / 6 / 2002 WED 12 : 00PM
DST : ON
AUTO CLOCK SET
COMPLETED
SETT I NG : CH 1 0
PLEASE SET CLOCK BY
PRESS I NG ACT I ON KEY
AUTO CLOCK SET
I S I NCOMPLETE
DM2092 (P14-15)Initial setup.p65 2002/06/19, 14:52 14