Panasonic PV DM2092 - Manual (Page 26)

26 For assistance, please call : 1-800-211-PANA(7262) or send e-mail : [email protected]
1
ON-TIMER with Alarm
TV Timer Features
Ready Checklist
The clock is set to the correct time.
This unit can be set to automatically power on in one of
4 modes (TV, VCR Playback, FM radio, or DVD/Video
CD/CD.) You can also combine the On-Timer with a
one minute alarm that gradually increases in volume.
• If no button on the remote or unit
(including a button used to turn off
the alarm) is pressed within 60
minutes after unit turns itself on, it
will turn itself back off.
Press PROG* to display SET PROGRAM
screen.
To Cancel ON-TIMER,
Repeat steps 1 and 2. Then, press ADD/DLT to clear
the time in step 3. Now, press PROG to end.
“ON TIMER END” briefly appears on-screen.
2 1) Press to select
“ON TIMER.”
2) Press SET to display
ON TIMER screen.
SET : SET
SELECT :
END : PROG
SET PROGRAM
T I MER PROGRAMM I NG
ON T I MER
S LEEP T I MER : 00
3
• ON-TIMER mode
selection order
1)Press to select
desired settings.
2)Press SET to set the
ON-TIMER TIME or
ON-TIMER mode.
• Make sure a tape is inserted
if Playback mode is selected.
• Make sure a disc is inserted
if DVD (DVD/Video CD/CD)
mode is selected.
• See “FM Radio” on pages 28
and 29 for instructions on
how to preset FM stations.
FM1
VCR CH01
CH125
FM8 FM9
CH02 CH03
DVD
ON T I MER
SELE CT HOUR
SET : SET
SELECT :
END : PROG
ALARM : ON
4 Press to select
ALARM “ON” or “OFF.”
When “ON” is selected,
an alarm will gradually increase in volume for one
minute or until canceled by pressing any button
(including VOL + -).
To Make Corrections,
use
and to move back and correct.
ON T I MER
SELE CT ALARM
SET : SET BACK :
SELECT :
END : PROG
ALARM : ON
CANCEL : ADD / DLT
5 Press PROG to set ON TIMER.
• “ON TIMER SET” is displayed.
• PROG TIMER Indicator lights up on the unit.
Sleep Timer
This unit can be set for auto power off.
Press PROG to display SET
PROGRAM screen. 1
SLEEP TIMER 30 60 90 00
To cancel,
press SET repeatedly until 00 appears.
2
SET : SET
SELECT :
END : PROG
SET PROGRAM
T I MER PROGRAMM I NG
ON T I MER
S LEEP T I MER : 00
1) Press
to select
SLEEP
TIMER.
2) Press SET
repeatedly
to select
the desired
time.
3 Press PROG to return to the
normal screen.
• Pressing DISPLAY with sleep
timer set displays remaining time.
PROG TIMER Indicator
Note
DM2092 (P26 TV timer).p65 2002/06/19, 14:52 26