Panasonic DVD S-29 DVD-S29 - Manual (Page 14)

14
R
Q
T777
2
Changing the player settings
≥ The settings remain intact even if you switch the unit to standby.
≥ Underlined items are the factory preset.
∫ “Disc” tab
∫ “Video” tab
1 2 3 4 5
Shows Setup menu. Select the tab. Select the item. Make the settings. Press to exit.
SETUP
ENTER
Select
Go right
ENTER
Select
Register
1 2 3
4 5 6
7 8 9
0 10
ENTER
Register
Select
SETUP
The QUICK SETUP enables successive settings of the items in the shaded area.
Audio
Choose the audio
language. English (Language options) § 1 Original § 2
Other ¢¢¢¢ § 3
Subtitle
Choose the subtitle
language. Automatic § 4 English (Language options) § 1
Other ¢¢¢¢ § 3
Menus
Choose the
language for disc
menus. English (Language options) § 1 Other ¢¢¢¢ § 3
≥ Changing the menu language from QUICK SETUP also
changes this setting.
Advanced Disc
Review
Select how to review
(
➜ page 7).
Intro Mode: Reviews each title/program.
Interval Mode: Reviews each 10 minutes.
Ratings
Set a ratings level to
limit DVD-Video play.
≥ Follow the on-
screen instructions.
Setting ratings (When level 8 is selected)
8 No Limit
1 to 7
0 Lock All: To prevent play of discs without ratings levels.
When setting a ratings level, a password screen is shown.
Follow the on-screen instructions.
Do not forget your password.
A message screen will be shown if a DVD-Video exceeding the
ratings level is inserted in the unit. Follow the on-screen instructions.
TV Aspect
Choose the setting to
suit your television
and preference. 4:3 Pan&Scan: Regular aspect television (4:3)
The sides of the widescreen picture are cut off so
it fills the screen (unless prohibited by the disc).
4:3 Letterbox: Regular aspect television (4:3)
Widescreen picture is shown in the letterbox
style.
16:9: Widescreen television (16:9)
TV Type
Select to suit the
type of television. Standard (Direct View TV) CRT Projector
LCD TV/Projector Projection TV
Plasma TV
Time Delay
When connected with an
AV amplifier and Plasma
display, adjust if you
notice the audio is out of
sync with the video. 0ms 20ms 40ms 60ms
80ms 100ms
Video Out (AV/
Component)
§ 5
Choose the video
signal format to be
output from the
SCART and
COMPONENT
VIDEO OUT
terminals. (
➜ page 4)
Video/YPbPr
S-Video/YPbPr
RGB/No Output
Still Mode
Specify the type of
picture shown when
paused. Automatic
Field:
The picture is not blurred, but picture quality is
lower.
Frame: Overall quality is high, but the picture may appear
blurred.
NTSC Disc Output
Choose PAL 60 or
NTSC output when
playing NTSC discs. PAL60: NTSC discs can be viewed on PAL television.
NTSC: Output signal from NTSC discs remains as NTSC.
(
[Asia] : “NTSC” is the factory preset.)
Changing t
he
pl
a
y
er sett
ings