Panasonic DVD S-29 DVD-S29 - Manual (Page 4)

4
R
Q
T777
2
STEP 1 Connection to a television
≥ Do not place the unit on amplifiers or equipment that may become hot. The heat can damage the unit.
≥ Do not connect through the video cassette recorder. Due to copy guard protection, the picture may not display properly.
≥ Turn off all equipment before connection and read the appropriate operating instructions.
≥ Connect the terminals of the same color.
≥ Unless otherwise indicated, illustrations are of the models for areas except the United Kingdom and Continental Europe.
(
\The\United\Kingdom\and\Continental\Europe\ :There is no S VIDEO OUT terminal on the unit.)
Please connect directly to TV. R
L
P R
P B
R
L
Y
P R
P B Y
Please connect directly to TV. y
AV
SCART (AV) IN
AUDIO IN
R L
COMPONENT
VIDEO IN
AUDIO IN
R L
VIDEO
IN
S VIDEO
IN
or
Audio/video
cable (included)
With VIDEO IN or S VIDEO IN
S video cable §
With SCART (AV) IN
21-pin SCART
cable
≥ If the television is compatible with S-
video, select “S-Video/YPbPr”, or
compatible with RGB, select “RGB/
No Output” for the AV terminals in
QUICK SETUP (
➜ page 5).
With COMPONENT VIDEO IN
Video
cables
§ When using this connection, the audio cable
(red and white plugs) should also be connected.
You can connect the audio cable to the 2-
channel audio input terminals of an analog
amplifier or system component to enjoy
stereo sound.
Audio/
video
cable
(included) Not used
Television
Back of the unit
\The\United\Kingdom\and\Continental\Europe\
To enjoy progressive video
Connect to a progressive output compatible television.
1\The\United\Kingdom\and\Continental\Europe]
Select “Video/YPbPr” for the component terminals in
QUICK SETUP (
➜ page 5).
2 Set “Video Output Mode” to “525 (480)p” or “625 (576)p”,
then follow the instructions on the menu screen
(
➜ page 13, Picture Menu).
\The\United\Kingdom\and\Continental\Europe]
Panasonic televisions with 625 (576)/50i · 50p, 525 (480)/
60i · 60p input terminals are progressive compatible.
C
o
nnecti
on to a
te
le
vi
sion