Philips TSU 7500 - Manual (Page 10)

User Guide
10
When you use ProntoPro NG for the first time, you will have to:
■ install the battery pack;
■ place ProntoPro NG in the docking station and charge it.
Attention Use the docking station only with the Philips NiMH rechargeable battery pack.
Never plug other appliances (like mobile phones, PDA’s, …) into the docking
station. This causes damage to the connector and the appliance.
Installing the Battery Pack
1 Press the latch on the battery cover with your thumb and then slide the
cover forward firmly.
2 Lift up the battery cover.
Before You Start
3 Place the battery pack in the battery
compartment.
ProntoProNG_0505_ML_1EN.qxd 14-06-2005 09:54 Pagina 10