Philips TSU 7500 - Manual (Page 34)

User Guide
34
Customizing ProntoPro NG
Setting the Volume Level
You can set the volume level for the hard buttons as well as for the touch screen
buttons. The volume of the button refers to the loudness of the beep you hear
when you press or tap a button.
Setting the Volume Level of the Hard Buttons
To adjust the volume of the hard buttons, tap in the first
Settings Page.
You can either select 1 of the 3 volume levels or choose to mute. Every time
you press, the volume level increases with one step up to level 3.
Setting the Volume Level of the Touch Screen
To adjust the volume level of the touch screen, tap in the
first Settings Page.
You can either select 1 of the 3 volume levels or choose to mute. Every time
you tap, the volume level increases with one step up to level 3.
Setting the Navigation for ProntoPro NG
The cursor is used by default to operate your devices. You then navigate the
ProntoPro NG with the touch screen buttons. However, you can also set the cursor
to browse through ProntoPro NG’s devices and pages. For more information on
operating the ProntoPro NG with the cursor, see ‘Operating ProntoPro NG with the
Cursor’ on page 48.
To set the navigation for the ProntoPro NG, tap in the
second Settings Page:
■ You can select Cursor Navigation-Off to navigate the ProntoPro NG with the
touch screen buttons.
■ You can select Cursor Navigation-On to navigate the ProntoPro NG with the
cursor.
ProntoProNG_0505_ML_1EN.qxd 14-06-2005 09:54 Pagina 34