Features 1 – 2 (flow and duration), Intelliflo, Intelliflo installation and user’s guide – Pentair Variable Speed Pump IntelliFlo User Manual
Page 32
26
IntelliFlo Installation and User’s Guide
Features 1 – 2 (Flow and Duration)
To run Feature 1 or 2 (Flow and Duration)
1. Press the Feature 1 or Feature 2 button, then press the Start/Stop button. The active feature LED
will be on until the process is finished.
2. The Features screen will then start to subtract time in minutes from your duration or you can scroll
using the Up or Down arrow buttons to see the power, speed, or flow status.
The following screen shown Feature 1 initiated:
Features 3 – 9 (Flow, Start/Stop Time)
Feature 3 – 9 affect the “Filter” mode as shown on page 20.
Feature 3 – 9 are programmed by a flow rate and a start/stop time and are automatically initiated. They are
controlled by the time of day. All alerts and alarms are active in Feature mode. Feature 3 – 9 must be
enabled in its menu.
Enabling Features 3 – 9
To use any Feature 3 – 9 it must be first enabled. If it is not enabled, it will not work with the parameters in
the “Set Flow” and “Set Start Time” and “Set Stop Time” settings. Features 3 – 9 are each programmed in
the same way. Three parameters are required after Enabling; Flow, Start, and Stop.
To use the Feature 3 settings; Enabled, Set Flow, Set Start Time, and Set Stop Time:
1. Ensure that the green power LED is on and the pump is stopped.
2. Press the Menu button. Press the Up or Down arrows to select the “Features” menu. Press the
Down arrow button to select Feature 3. Press the Select button to access the Feature 3 menu
settings. The Features 3 menu setting is displayed.
Filter
Vacuum
Back
Wash
Manual
Enter
Select
Start
Stop
Reset
Feature
2
Feature
1
Men
u
Escape
On
Warn.
Alarm
IntelliFlo
®
Feature 1
Feature 1
12:54
12:54
Set Flow
Set Flow
50.GPM
50.GPM
Filter
Vacuum
Back
Wash
Manual
Enter
Select
Start
Stop
Reset
Feature
2
Feature
1
Men
u
Es
cape
On
Warn.
Alarm
IntelliFlo
®
Feature 1
Feature 1
3:02
3:02
Time Duration
Time Duration
0:01
0:01
Feature 1 LED on
Start / Stop LED on
Time remaining in minutes
Pump run status
Filter
Vacuum
Back
Wash
Manual
Enter
Select
Start
Stop
Reset
Feature
2
Feature
1
Men
u
Escape
On
Warn.
Alarm
IntelliFlo
®
FEATURE 1
FEATURE 1
5:01
5:01
REMAINING TIME
REMAINING TIME
RUNNING
RUNNING
1.MIN
1.MIN