Philips DVD1010 - Manual (Page 21)

English
PREPARATION 23
Switching on
1 Switch on the TV and select the video input for your DVD-Video
player.
2 Press POWER ON/OFF.
➤
The player display lights up and the ‘Virgin Mode Screen’
appears.
The ‘Virgin Mode’ will only occur after the very first start up of the
player. In ‘Virgin Mode’ you may have to set your personal preferences
for some of the player’s most relevant items. See ‘Virgin Mode’ in the
following.
Virgin Mode
General
In ‘Virgin Mode’ you may have to set your preferences for some of the
player’s features.
Manual operation
After switching on the player for the very first time, the ‘Virgin Mode
Screen’ will appear (see ‘Switching On’).
The menu for the first item to be set is displayed and the first option is
highlighted.
● Use the w v keys to go through the options in the menu. The icon
of the selected option will be highlighted.
● Press OK to confirm your selection and to select the next menu.
Automatic setting
When settings can be taken over from your TV or Home Cinema
system, the message ‘Auto configuring in process’ will appear.
Menus for which no settings are available will be displayed. They have to
be set manually.
Note: Preferences have to be set in the order in which the item menus will
appear on the screen.
The ‘Virgin Mode’ will only be cancelled after the settings for the last item
have been confirmed.
If any other keys than w v or OK are pressed,
will appear on the
screen.
If the player is switched off while setting personal preferences, all preferences
will have to be set again after switching the player on again.
PREVIOUS RESUME NEXT
ZOOM
VOL CH
DNM
ANGLE
ON/OFF
VIDEO