Pfaff QUILT EXPRESSION 4 - Manual (Page 2)

PFAFF ® Accessories
• Sensormatic Free-motion foot 6A
• 0A Standard presser foot with IDT™
• 1A Fancy stitch foot with IDT™
• 2A Fancy stitch foot
• 4 Zipper foot with IDT™
• ¼” Quilting foot with IDT™
Preparations and Cutting Instructions
Seam allowance included in all measurements.
Use rotary cutter and 8 ½”x 24” omnigrid ruler
with cutting mat.
From purple batik quilt fabric, cut:
• One piece 25cm x 20cm (10” x 8”)
for the back side.
• One piece 6cm x 20cm (2¾ x 8”)
for the front side.
• One piece 14cm x 20cm (5,5” x 8”)
for the front side
From yellow quilt fabric, cut:
• Two pieces 25cm x 20cm (10” x 8”)
for the lining.
• One strip 4,5cm x 20cm (1⅞ x 8”).
From pink patterned quilt fabric, cut:
• One strip 4,5cm x 20cm (1⅞ x 8”).
From fusible batting, cut:
• Two pieces 25cm x 20cm (10” x 8”)
From heavy fusible interfacing, cut:
• Two pieces 25cm x 20cm (10” x 8”)
Press the heavy fusible interfacing onto the wrong
side of the two yellow lining quilt fabric pieces.
Press the fusible batting onto the wrong side of the
purple back piece quilt fabric.
FRONT PIECE
Select a straight stitch (stitch #1), length 2.5mm.
Snap on the ¼” quilting foot. Thread the machine with
regular sewing thread on top and in the bobbin.
illu1 illu 2 illu 3
illu 4
illu 5
illu 6
illu 7
illu 8
illu 9
Sew the yellow and the pink strips together.
To get a perfect ¼” seam allowance; let
the edge of the fabric follow the right edge
of the presser foot. Press open seam
allowance.
Sew the pink/yellow strip between the two purple
pieces. Using the same settings, seam allowance, etc as
above. Press the seam allowances together towards the
darker purple pieces.
illu1 illu 2 illu 3
illu 4
illu 5
illu 6
illu 7
illu 8
illu 9
Cut down the whole front piece to the same size as all
other pieces 25cm x 20cm (10” x 8”). Press the fusible
batting onto the wrong side of the pieced front piece.
“Make it – Take it Project” Carry-on Make-up Bag | 2