Panasonic TH-50PF9UK - Manual (Page 20)

20
Adjusting POS. /SIZE
1
Press to display the POS. /SIZE menu.
Press to select AUTO SETUP / H-POS / H-SIZE /
V-POS / V-SIZE / DOT CLOCK / CLOCK PHASE /
1:1 PIXEL MODE
Press to adjust POS. /SIZE.
Press to exit from adjust mode.
3
2
Notes:
• Adjustment details are memorized separately for different input signal formats
(Adjustments for component signals are memorized for 525 (480) / 60i · 60p, 625
(575) / 50i · 50p, 1125 (1080) / 60i · 50i · 60p · 50p · 24p · 25p · 30p · 24sF, 1250
(1080) / 50i, 750 (720) / 60p · 50p each, and RGB/PC/Digital signals are memorized
for each frequency.)
• If a “Cue” or “Rew” signal from a VCR or DVD player is received, the picture position
will shift up or down. This picture position movement cannot be controlled by the
POS. /SIZE function.
• If adjusting the PICTURE V-POS / V-SIZE in Panasonic AUTO with FULL mode,
the adjustment is not memorized. When exiting the mode, the screen will return
to a former adjustment.
While the POS. /SIZE display is active, if either the N button on the remote control is pressed at any time or the ACTION
( ) button is pressed during “NORMALIZE”, then all adjustment values are returned to the factory settings.
Helpful Hint ( /
NORMALIZE
Normalization)
4
D u r i n g “ C O M P O N E N T ” ,
“RGB” and “PC” input signal.
During “VIDEO (S VIDEO)”, “Digital”,
“SDI” and “HDMI” input signal.
0
0
0
NORMAL NORMALIZE
POS. /SIZE
V-POS
H-POS
0 V-SIZE
H-SIZE
1:1 PIXEL MODE OFF
AUTO SETUP
0
NORMAL NORMALIZE
AUTO SETUP
POS. /SIZE
V-POS
0 H-POS
V-SIZE
DOT CLOCK
H-SIZE
CLOCK PHASE
1:1 PIXEL MODE OFF
0
0
0
0