Options adjustments – Panasonic TH-50PF9UK User Manual
Page 42
42
2/3
Options
Off
Off
Off
Off
0
Remote ID
Serial ID
ID select
Button lock
Remocon User level
Item
Effect Adjustments
Button lock
Off
MENU&ENTER
On
Off: All the buttons at the bottom of the main unit can be used.
MENU & ENTER:
Locks
MENU
and
ENTER/
buttons on bottom face of main unit.
On:
Locks all the button on bottom face of main unit.
Remocon
User level
Off
User1
User2
User3
Off: You can use all of the buttons on the remote control.
User1: You can only use
,
,
,
, ,
,
,
buttons on the remote control.
User2: You can only use
,
, buttons on the remote control.
User3: Locks all the buttons on remote control.
ID select
Sets panel ID number when panel is used in “Remote ID” or “Serial ID”.
Set value range: 0 - 100
(Standard value: 0)
Remote ID
Off
On
Off: Disables ID remote control functions. You can use normal remote control operations.
On:
Enable ID remote control functions.
Serial ID
Off
On
Sets the panel ID Control.
Off: Disables external control by the ID.
On:
Enables the external control by the ID.
Item
Effect Adjustments
Slot Power
Off
Auto
On
Off: Power is not transmitted to the slot power.
Auto: Power is transmitted to the slot power only when main power is on.
On:
Power is transmitted to the slot power when main power is on or in the standby state.
Note: In some cases, power is transmitted to the slot power when main power is on or in the standby
state regardless of the slot power setting.
V.Installation
Off
On
This mode cannot be used for this model.
Rotate
Off
On
Off: Does not rotate the image.
On:
Rotates the image 180 degrees.
Serial Slot
Select
Slot1
Slot2
Slot3
Selects the slot which communicates serial.
Note: The setting of an external command can be set only from the fi xed serial terminal (see page 11)
3/3
Options
O f f
O f f
O f f
V . lnstallation
Rotate
Slot1
Serial Slot Select
Slot power
Normalization
When both main unit buttons and remote control are disabled due to the “Button lock”, “Remocon User level” or “Remote
ID” adjustments, set all the values “Off” so that all the buttons are enabled again.
Press the
button on main unit together with
button on the remote control and hold for more than 5 seconds. The
“SHIPPING” menu is displayed and the lock is released when it disappears.
Options Adjustments