Philips HTS3371D/F7 - Manual (Page 18)

18
Control a play source
1
Select the source you wish to control by
pressing the AUDIO SOURCE , RADIO ,
USB , DOCK or DISC button.
2
Then select the desired function (for
example , ).
Navigate through the menu
1
Point the remote control directly at the
remote sensor on the Home Theater
System and select the desired function.
2
Press the following buttons on the
remote control to navigate through the
on-screen menus.
Button Action
Move up or down
Move left or right
OK ConÀ rm a selection
Enter numbers
4 Get started
Insert the remote control
batteries
1
Slide the battery cover off the back of the
remote control.
2
Insert the 2 supplied batteries (AAA). Be
sure the + and - ends of the batteries line
up with the markings inside the case.
3
Slide the cover back into position.
Note
Do not mix batteries (old and new or carbon and •
alkaline, etc.).
Remove batteries if they are exhausted or if the
•
remote control is not to be used for a long time.
Batteries contain chemical substances, they should
•
be disposed of properly.
EN
1_hts3371D-72D_F7_en 3.indd 18 4/30/2009 8:38:34 PM