Philips HTS3371D/F7 - Manual (Page 42)

42
Note
If the setting is not compatible with your TV, a blank •
screen appears. Wait for 15 seconds for auto recover
or switch to its default mode as follows: 1) Press . 2)
Press . 3) Press ZOOM .
[Closed Caption]
Turns off or on display captions.
• [On] – Shows the sound effects in
subtitles. Applicable only to discs with
Closed Caption information included and
the TV supports this feature.
• [Off] – Disables closed caption.
[Progressive]
If the TV supports progressive scan output,
you can turn on the progressive scan mode to
enhance the picture quality. Video connection
through Component Video is required.
• [On] – Turns on progressive scan mode.
• [Off] – Disables progressive scan mode.
Tip
There is more detailed description available (see ‘Get •
started’ > ‘Turn on Progressive Scan’).
[HDMI Setup]
Selects the HDMI video setting when you
connect this Home Theater System and the
TV with a HDMI cable.
• [Wide Screen Format] – DeÀ nes the
wide screen format for disc play.
Option Description
[Superwide] Center position of the
screen is stretched
less than the side.
Applicable only to
720p and above video
resolution setting.
[4:3 Pillar
Box] No stretching of the
picture. Black bars are
displayed on both sides
of the screen.
[Off] Picture is displayed
according to the format
of the disc.
Note
This setting is only available if you have set the • [TV
Display] setting to [16:9 Wide Screen] .
[HDMI Video] – Selects the HDMI video
output resolution that is compatible with
your TV display capability.
Option Description
[Auto] Detects and selects
the best supported
video resolution
automatically.
[480i] , [576i] ,
[480p] , [576p] ,
[720p] , [1080i] ,
[1080p] Selects a video
resolution that is best
supported by the TV.
See the TV manual for
details.
EN
1_hts3371D-72D_F7_en 3.indd 42 4/30/2009 8:38:37 PM