Panasonic VQT0C55 - Manual (Page 27)

E-27
Switching on the power
REW
PLAY
STO
REC INH. PAL
AUDIO
NTSC DVCAM
POWER
REC A.DUB
CH
1 / 3
2 / 4 LINE
DV S-VIDEO
OFF
9PIN WIRELESS
INPUT REMOTE MIC
AG-DV2500
DISPLAY
BARS
MENU SEARCH+
SEARCH–
A.DUB
F.REV
INDEX
– INDEX
+
PLAY
STOP
VEQ3533
REW FF
PAUSE
SET
BLANK
STILL
MODE
VCR
POWER
/I
AUDIO
MUTING
OUT SEL.
OUT LEV.
REC
F.ADV
POWER indicator
POWER button
Turning off the power
Ⅵ Stop all operational activities of the unit.
1.
Press the POWER button on the unit or the remote controller.
• The unit will enter the POWER OFF mode and the POWER indicator will light up red.
2.
If the unit is not to be used for a long period of time, please unplug the AC adapter.
• To disconnect the AC adapter, please unplug the mains cable from the socket first.
Ⅵ When the unit is in the POWER OFF
mode (the POWER indicator lights up
red), press the POWER button on the
unit or the remote controller.
• The power is turned on and the POWER indi-
cator lights up green. The unit is now ready for
operation. (POWER ON mode)
Memo
• Once a cassette has been loaded in the
POWER OFF mode, power will be turned on
and the POWER ON mode will be engaged.
• The remote controller is only effective when
the REMOTE switch is set to “WIRELESS”.
Note
• After pressing the POWER button and turning
on the power, if the LED blinks in green or the
“UNPLUG MAIN POWER, PLUG BACK IN
AFTER A WHILE” is displayed on the monitor,
please unplug the mains cable from the outlet
and then wait for some time before plugging it
in again.