Panasonic VQT0C55 - Manual (Page 47)

E-47
PLAYBACK
– Selecting playback audio output –
The output mode for audio playback can be selected with the remote controller.
DISPLAY
BARS
MENU SEARCH+
SEARCH–
A.DUB
F.REV
INDEX
– INDEX
+
PLAY
STOP
VEQ3533
REW FF
PAUSE
SET
BLANK
STILL
MODE
VCR
POWER
/I
AUDIO
MUTING
OUT SEL.
OUT LEV.
REC
F.ADV
AUDIO MUTING
button
OUT SEL.
button
OUT LEV.
button
Memo
• The output channel for playback audio of
tapes recorded in the 32kHz mode can also
be set via the AUDIO OUT SEL item of the
AUDIO/VIDEO menu of the main unit.
• The audio output level can be set via the
AUDIO OUT LEVEL item of the AUDIO/
VIDEO menu.
(
☞
Page 57 “AUDIO/VIDEO menu”)
Ⅵ To turn the audio muting function ON/
OFF or to mute the EE audio, press the
AUDIO MUTING button.
To resume the audio output, press the button
again.
Ⅵ Selecting the audio output channel for
playback of tapes recorded in the 32kHz
mode.
Each time the OUT SEL. button is pressed, the
channel changes in the following sequence:
• CH3/CH4 : CH3 audio is output via the CH1/3
AUDIO OUT terminal whereas
CH4 audio is output via the CH2/4
AUDIO OUT terminal.
• MIX : Sounds mixed from CH1 and CH3
are output via the CH1/3 AUDIO
OUT terminal whereas Sounds
mixed from CH2 and CH4 are out-
put via the CH2/4 AUDIO OUT ter-
minal.
CH1/CH2 CH3/CH4 MIX
Note
Depending on the sound source, noise may
occur in the MIX mode. In this case, please
use CH1/CH2 or CH3/CH4.
Ⅵ Select the output level for audio play-
back
Each time the OUT LEV. button is pressed, the
standard level for the output audio level changes.
(NORMAL or ATT)
• When the output level is set at ATT, the audio
output level is decreased by 8dB.
• To play back tapes recorded on this unit, set
the output level to NORMAL.