Functional overview, Controls on the system – Philips FW-D550 User Manual

Page 15

Advertising

English

Functional Overview

Controls on the system

1 ECO POWER
–

to switch the system on or to Eco Power
Standby mode.

2 STANDBY ON

–

to switch the system on or to Standby mode.

3 DISPLAY SCREEN
–

to view the current status of the system.

4 DISC TRAYS
5 DISC CHANGE
–

to change disc(s).

6 DISC 1 / DISC 2 / DISC 3
–

to select a disc tray for playback.

7 OPEN•CLOSE
–

to open or close the disc tray.

8 INTERACTIVE VU METER
–

to show the VU (volume unit) meter in music or
volume mode depending on the display mode
selected.

9 SENSOR
–

point the remote control towards this sensor.

0 VOLUME
–

to increase or decrease the volume.

! Tape Deck Operation

AUTO REPLAY

–

to select continuous playback in either AUTO
PLAY or ONCE mode only.
DUBBING

–

to dub a tape.
REC

–

to start recording on tape deck 2.

@ VOCAL
–

to fade out the original vocal from Karaoke or to
switch between mono or stereo mode during
audio disc playback.

# JOG CONTROL
–

to select the desired sound effect for the
selected sound feature.

$ KEY CONTROL
–

to change the tone level to suit your vocal range.
I .................to decrease the key tone level.

.................to restore the key tone level to

original setting.

i .................to increase the key tone level.

% ECHO
–

to adjust the echo level for karaoke after
inserting the microphone.

^ SOUND
–

to activate or deactivate the surround sound
effect.

& MAX SOUND (MAX)
–

to activate or deactivate the optimal mix of
various sound features.

* MIC/LEVEL
–

to connect microphone jack.

–

to adjust the mixing level for karaoke or
microphone recording.

(

–

to open the tape deck door.

) TAPE DECK 1
¡ TAPE DECK 2
™ SOURCE
–

to select the following:
DISC (DISC 1•2•3)

–

to select disc tray 1, 2 or 3
TUNER (BAND)

–

to select waveband: FM or MW.
TAPE (TAPE 1-2)

–

to select tape deck 1 or 2.
AUX/TV

–

to select a connected external source: TV/CDR
or AUX (auxiliary) mode.

£ Mode Selection

PLAY/PAUSE

for DISC .................... to start or interrupt playback.
for TAPE ..................... to start playback.
for PLUG&PLAY ... (on the system only) to initiate

plug & play mode.

SEARCH•TUNING

1 ¡

(ALBUM – / +)
for DISC .................... to search backward/forward.
for TAPE ..................... to rewind or fast forward.
for TUNER ............... to tune to a lower or higher

radio frequency.

for CLOCK .............. (in standby mode)to set the

minute and hour.

DEMO STOP/CLEAR

for DISC .................... to stop playback or to clear a

programme.

for DEMO ................ (in Standby or ECO power

mode) to activate/deactivate
demonstration.

for PLUG&PLAY ... (on the system only) to exit

plug&play mode.

Advertising