Functional overview, Remote control – Philips FW-D550 User Manual

Page 17

Advertising

English

Functional Overview

Remote control

Notes:
– First, select the source you wish to control by
pressing one of the source select keys on the
remote control (DISC or TUNER, for example).
– Then select the desired function (

for example).

1 SOURCE
–

to select the relevant active mode: TAPE, DISC,
TUNER or AUX/TV.

–

TUNER: toggles between FM and MW band.

–

AUX/TV: toggles between AUX-ANA and AUX-
DIG(Digital Input) mode.

2 DISC MENU (disc mode only)
–

to enter or exit the disc contents menu.

3 SYSTEM MENU (disc mode only)
–

to enter or exit the system menu bar.

4 3 / 4 / 1 / 2
–

in Tuner mode, to select a preset radio station
number ( 1 or 2).

–

to select movement direction in disc contents
menu/system menu bar.

4 / ¢

–

in Disc mode, press to skip to the previous/next
chapter/track.

–

in Disc mode, press and hold to fast reverse/
forward the disc.

–

in Tuner mode, to tune to a lower or higher
radio frequency.

6 PLAY/PAUSE 2;
–

to start or interrupt disc playback.

7 STOP 9
–

to stop playing the disc.

8 SURROUND
–

to select multichannel surround (Dolby Digital,
DTS and VSS) or stereo sound effect.

9 SOUND
–

to select various sound effect: CONCERT,
DRAMA, ACTION,SCI-FI, CLASSIC, JAZZ,
ROCK, DIGITAL, MAX ON or MAX OFF.

0 MODE
–

to select the REPEAT or SHUFFLE function.

! REPEAT A-B
–

to repeat a specific section on a disc.

@ POWER

–

to switch to standby mode.

# Numeric Keypad (0-9)
–

to enter a track/title number of the disc.

–

to enter a number of preset radio stations.

$ VOL +/-
–

adjust the volume level.

% OK
–

to exit or confirm the selection.

^ RESUME
–

to continue disc playback after interruption.

& MUTE
–

to interrupt or resume sound reproduction.

* NIGHT (Dolby Digital mode only)
–

to optimize the dynamic effect of the sound
output.

( DIM
–

to select different brightness for the display.

) SLEEP
–

to set the sleep (auto-off) timer function.

¡ SUBW +/-(for subwoofer connection only)
–

to adjust the subwoofer’s level.
REAR +/-(for 5.1 speaker connection only)

–

to adjust the rear speakers’ level.
CENTER +/-(for 5.1 speaker connection only)

–

to adjust the center speaker’s level.
TV VOL+/-

–

to adjust Philips’ television volume level.

Advertising