Pioneer DEH P4100UB - Manual (Page 38)

Black plate (38,1)
Making a phone call
Voice recognition
1 Press BAND/ESC and hold until
VOICE DIAL appears in the display.
VOICE DIAL appears in the display. When
VOICE DIAL ON is displayed, voice recogni-
tion function is now ready.
# If your cellular phone does not feature voice
recognition function,
NO VOICE DIAL appears in
the display and operation is not possible.
2 Pronounce the name of your contact.
Taking a phone call
Answering or rejecting an incoming call
% Answering an incoming call
When a call comes in, press
MULTI-CONTROL.
# You can also perform this operation by push-
ing
MULTI-CONTROL up.
% End a call
Push
MULTI-CONTROL down.
% Rejecting an incoming call
When a call comes in, push
MULTI-CONTROL
down.
Notes
! If private mode is selected on the cellular
phone, hands-free phoning may not be per-
formed.
! The estimated call time appears in the display
(this may differ slightly from the actual call
time).
Operating a call waiting
% Answering a call waiting
When a call comes in, press
MULTI-CONTROL.
# You can also perform this operation by push-
ing
MULTI-CONTROL up.
% End all calls
Push
MULTI-CONTROL down.
% Switch between callers on hold
Press
MULTI-CONTROL.
# You can also perform this operation by push-
ing
MULTI-CONTROL up.
% Rejecting call waiting
Push
MULTI-CONTROL down.
Notes
! Pushing MULTI-CONTROL down ends all
calls including calls waiting on line.
! To end the call, both you and your caller need
to hang up the phone.
Introduction to advanced
operations
1 Press MULTI-CONTROL to display the
main menu.
2 Use MULTI-CONTROL to select
FUNCTION.
Turn to change the menu option. Press to se-
lect.
3 Turn MULTI-CONTROL to select the
function.
SEARCH PHONE (search and connect)
—
CONNECTION OPEN (connection open)
—
DISCONNECT PHONE (disconnect phone)
—
CONNECT PHONE (connect phone)
—
SET PHONE (registering phone)
—
DELETE PHONE (delete phone)
—
PH BOOK TRANSFER (phone book transfer)
—
CLEAR MEMORY (clear memory) —
NUMBER DIAL (call by entering number)
—
REFUSE CALLS (automatic reject setting) —
AUTO ANSWER (automatic answer setting) —
RING TONE (ring tone select) —
AUTO CONNECT (automatic connection set-
ting)
—ECHO CANCEL (echo cancel)—
DEVICE INFO (device information)
If not connected yet
The following functions cannot be operated.
<YRD5265-A/S>38
Available accessories
En
38
Section
06