Attaching the front panel 8, About the demo mode, Use and care of the remote control – Pioneer DEH P4100UB User Manual

Page 8: Installing the battery 8, Before you start, Attaching the front panel, Installing the battery

Advertising
background image

Black plate (8,1)

2

Grab the front panel and remove.

Attaching the front panel

1

Slide the front panel to the left until it

clicks.
Front panel and the head unit are jointed on
the left side. Make sure that the front panel
has been jointed to the head unit.

2

Press the right side of the front panel

until it is firmly seated.

# If you can’t attach the front panel to the head
unit successfully, try again. Front panel may be
damaged if you attach the front panel forcedly.

About the demo mode

This unit features the feature demo mode.

Important

! The red lead (ACC) of this unit should be con-

nected to a terminal coupled with ignition
switch on/off operations. If this is not done,
the vehicle battery may be drained.

! Before detaching, be sure to remove the AUX

cable from the front panel. Otherwise, this

unit, connected device or vehicle interior may
be damaged.

Feature demo mode
The feature demo automatically starts when
power to this unit is turned off while the igni-
tion switch is set to ACC or ON. Press

DISP

during feature demo operation to cancel the
feature demo mode. Press

DISP again to start.

Remember that if the feature demo continues
operating when the car engine is turned off, it
may drain battery power.

Use and care of the remote
control

Installing the battery

Slide the tray on the back of the remote con-
trol out and insert the battery with the plus (+)
and minus (

–) poles aligned properly.

! When using for the first time, pull out the

film protruding from the tray.

WARNING

Keep the battery out of the reach of children.
Should the battery be swallowed, consult a doc-
tor immediately.

CAUTION

! Use one CR2025 (3 V) lithium battery.
! Remove the battery if the remote control is not

used for a month or longer.

! There is a danger of explosion if the battery is

incorrectly replaced. Replace only with the
same or equivalent type.

! Do not handle the battery with metallic tools.
! Do not store the battery with metallic objects.

<YRD5265-A/S>8

Before You Start

En

8

Section

01

Advertising