Panasonic KX-HCM10 - Manual (Page 46)

Operating Instructions
46
3.3.4 Viewing Buffered Image Screen
Buffered Image screen can be viewed by clicking [Viewer] on the operation bar.
Buffered Image is saved in the internal memory of Network Camera by clicking
[Start Capture]. Alarm/Timer mode in the Image Transfer on page 66 can also
buffer the image. Buffered Image is erased by power off, restarting, Update
Firmware, resetting to Factory Default and when Image Transfer or Name/Time
window is saved and clicking [Start Capture].
Operation bar of the Single Camera screen changes in the Image Transfer mode.
[Start Capture] and [Viewer] are displayed in the Non Transfer mode.
[Primary] and [Secondary] are displayed in the Alarm/Timer mode.
Refer to page 66 about the Image Transfer feature.
Non Transfer mode Alarm/Timer mode
The image number, date and
time are displayed.
(The example shows 12h 0min
0s 000ms on January 1st, 2003)
[Play]
The buffered images are
displayed continuously.
[<Prev] & [Next>]
The previous image or next
image is displayed.
[<10] & [10>]
The 10th image before or
after the image is displayed.
[<100] & [100>]
The 100th image before or
after the image is displayed.