Panasonic KX-HCM10 - Manual (Page 84)

Operating Instructions
84
3.5.11 Indicator Control
Indicator Control window allows you to select Power Indicator operation. Power
Indicator operation has three patterns.
• Always on
• Turns on when accessing Network Camera
• Always off
Notes
• Power Indicator can be controlled in case the administrator does not
want to draw attention to Network Camera. This may be desirable when
used for security applications.
• Indicator Control window cannot control Ethernet Indicator on page 15.
1. Click [Indicator Control] on Setup Page.
2.
Select the Power Indicator on/off. Click [Save] when finished.
• Click [Cancel] to quit the current settings. The window returns to Setup
Page without saving the parameters.