General product specification – Philips V30 User Manual
Page 60
60
107T5
GENERAL PRODUCT SPECIFICATION
Go to cover page
17" V30 GS4 107T5-71K CMTR
TYPE
: 107T51/00
BRAND
: PHILIPS
2003-01-07
Wayne Lin
2003-01-07
30
18
590
4.13
Purity
Test patterns : Full white / Red / Green / Blue.
Conditions
: As stated in item 4.0, the purity must be checked under specific
destinations of earth magnetic environments and the monitor
must be well degaussed.
After warming-up time of 30 min. , no color stains may occur in the above four patterns.
4.14
Moiré
Condition: Display a full white pattern. At any preset mode ,
the display size must be set as Fig.1.
The clouding effect must not rise to disturbing levels in anywhere of the screen with
luminance setting from 15 to 30 FL.
4.15
Blemish
Blemish shall be in accordance with CRT specification.
5.0
Mechanical characteristics
5.1
User controls
-
Power ON/OFF key
-
LightFrame key
-
3 Key digital user control (OSD)
5.2
Connectors and cables
5.2.1 Power cord type : 3 leads plugable power cord with protective earthed plug or IBM Hooded
Length
: 1.5 m
± 50 mm (excluding connector)
Safety requirements
: See following.
Approval
Countries
Mains plug
Wire
Connector
Germany
VDE
VDE
VDE
Switzerland
--
SVE
SVE
Belgium
CEBEC
--
--
Sweden
SEMKO
SEMKO
SEMKO
Finland
EI
--
EI
Norway
NEMKO
NEMKO
--
Denmark
DEMKO
DEMKO
DEMKO
Italy
OVE
--
OVE
Netherlands
KEMA
KEMA
KEMA
U.K.
ASTA
HAR
ASTA
U.S.A.
UL
UL
UL
Canada
CSA
CSA
CSA
Australia
SAA
SAA
SAA