Panasonic KX-TG6700AL - Manual (Page 13)

Preparation
13
Setting up the handset
Battery installation/replacement
1
Press the notch of the handset cover
firmly, and slide it in the direction of the
arrow.
L
If necessary, remove the old battery.
2
Insert the battery ( A), and press it
down until it snaps into position ( B).
Then close the handset cover ( C, D).
Important:
L
Use only the rechargeable Panasonic
battery noted on page 5.
Battery charge
Place the handset on the base unit for 7
hours before initial use.
While charging, the charge indicator on the
handset lights in amber. When the battery
is fully charged, “Charge completed” is
displayed.
Note:
L If you want to use the handset
immediately, charge the battery for at
least 15 minutes.
L
To ensure that the battery charges
properly, clean the charge contacts of
the handset and base unit with a soft,
dry cloth once a month. Clean more
often if the unit is subject to the exposure
of grease, dust, or high humidity.
A
B
C
D
TG6700AL.book Page 13 Tuesday, June 27, 2006 2:08 PM