Panasonic KX-FT934HK - Manual (Page 14)

4. Telephone
14
L You can also send faxes using the one-touch dial
feature (page 19).
4.2.1 Storing one-touch dial items
1 Press {MENU} repeatedly to display “ PHONEBOOK
SET”.
2 Select the desired station key.
For stations 1–5:
Press one of the station keys.
For stations 6–10:
Press {LOWER}, then press one of the station keys.
3 Enter the name, up to 16 characters (see page 11 for
instructions).
4 Press {SET}.
5 Enter the telephone number, up to 24 digits.
6 Press {SET}.
L To program other items, repeat steps 2 to 6.
7 Press {STOP}.
To correct a mistake
1. Press {<} or {>} to move the cursor to the incorrect
character/number.
2. Press {STOP}.
L To erase all characters/numbers, press and hold
{
STOP}.
3. Enter the correct character/number.
4.2.2 Making phone calls using the one-
touch dial
Before using this feature, store the desired names and
telephone numbers for the one-touch dial feature (page
13).
1 Lift the handset or press {MONITOR}.
2 Select the desired station key.
For stations 1–5:
Press the desired station key.
For stations 6–10:
Press {LOWER}, then press the desired station key.
L The unit will start dialling automatically.
4.2.3 Editing a stored item
1 Press {>}.
2 Press {A} or {B} repeatedly to display the desired
item.
3 Press {MENU}.
4 Press {*}.
L If you do not need to edit the name, skip to step
6.
5 Edit the name. For further details, see the storing
procedure on page 14.
6 Press {SET}.
L If you do not need to edit the telephone number,
skip to step 8.
7 Edit the telephone number. For further details, see
the storing procedure on page 14.
8 Press {SET}.
4.2.4 Erasing a stored item
1 Press {>}.
2 Press {A} or {B} repeatedly to display the desired
item.
3 Press {MENU}.
4 Press {#}.
L To cancel erasing, press {STOP}.
5 Press {SET}.
Caller ID
4.3 Caller ID service
This unit is compatible with Caller ID service offered
by your local telephone company. To use this
feature, you must subscribe to Caller ID service.
Important:
L This unit will only display the caller’s telephone
number and name.
L This unit will not support future additional
telephone services.
L This unit cannot support services based on the
“DTMF based subscriber line protocol”.
L Depending on the service of the local telephone
company, the date/time of the call or the caller’s
name may not be displayed.
Make sure the following ring setting is set to 2 or
more rings beforehand.
– FAX ring setting (feature #06 on page 26)
– TEL/FAX ring setting (feature #78 on page 28)
{A}{B}{<}{>}
{ MENU}
{ LOWER} Station keys
{ STOP}
{ MONITOR}
{ SET}
FT932_934HK-PFQX2561YA-en.book Page 14 Monday, May 8, 2006 5:05 PM