Philips 19PFL3504D - Manual (Page 13)

12
Still Mode
You can pause the image shown on the TV screen.
Press FREEZE to pause the image shown on the TV screen.
FREEZE
• The sound output will not be paused.
• If no signal is detected or protected signal is received during still
mode, the image remains paused and the sound output will be
muted.
• The still function will be released after 5 minutes.
To cancel still mode, press any button except
. (Standby-On).
Watch Channels from a Set-top Box
To watch channels from a set-top box
1
Switch on the set-top box.
» The picture from your set-top box might appear automatically
on the TV screen.
2
Use the remote control of your set-top box to select channels.
If the picture does not appear
1
Press SOURCE repeatedly to select the set-top box and wait a
few seconds for the picture to appear.
2
Use the remote control of your set-top box to select channels.
Watch Connected Devices
To watch connected devices
1
Switch on the connected device.
» The picture from your connected device might appear
automatically on the TV screen.
2
Use the remote control of the device to select channels.
If the picture does not appear
1
Press SOURCE repeatedly to select the connected device and wait
a few seconds for the picture to appear.
2
Use the remote control of the device to select channels.
Adjust Volume
VOLUME
To increase or decrease volume
• Press
VOL +/- on the remote control or press VOLUME +/- on
the side of the TV.
To mute or unmute sound
• Press MUTE on the remote control to mute the sound.
• Press MUTE again to restore the sound.
EN