Configuring your system, Local digit map, Configuring your system –6 – Polycom VVX C Business Media Phone for Cisco Unified Communications Manager (SIP) User Manual
Page 26: Local digit map –6
Deployment Guide for the Polycom VVX 1500 C
3 - 6
Configuring Your System
After you set up your Polycom VVX 1500 C phones on the network, you can
allow users to place and answer calls using the default configuration,
however, you may require some basic changes to optimize your system for
best results.
This section provides information for making configuration changes for:
•
(or Dial Plan)
•
•
•
Recording and Playback of Audio Calls
•
•
•
•
To troubleshoot any problems with your Polycom VVX 1500 C phones on the
network, refer to
Troubleshooting the Polycom VVX 1500 C Phone
on page
.
Local Digit Map
The phone has a local digit map feature to automate the setup phase of
number-only calls. When properly configured, this feature eliminates the need
for using the Dial or Send soft key when making outgoing calls. As soon as a
digit pattern matching the digit map is found, the call setup process will
complete automatically. Digit maps do not apply to on-hook dialing.
//www.polycom.com/support/voice/soundpoint_ip/VoIP_Technical
_Bulletins_pub.html
.
Configuration changes can be performed centrally at the provisioning server
or locally. For detailed information on configuration file settings, refer to
on page