Philips DC350/37 - Manual (Page 20)

English
21 EN
Connect with a Bluetooth device
Note
The operational range between this unit and a Bluetooth device is approximately 10 meters (30 feet). •
Before you connect a Bluetooth device to this unit, familiarize yourself with the Bluetooth •
capabilities of the device.
Compatibility with all Bluetooth devices is not guaranteed.
•
Any obstacle between this unit and a Bluetooth device can reduce the operational range.
•
Keep this unit away from any other electronic device that may cause interference. •
Connect a device for the fi rst time
Tip
This unit can memorize the connection information of up to 8 devices. •
1
Press BLUETOOTH to select the Bluetooth source.
2
For an iPhone, load it in the dock for automatic re-connection setup.
3
Press and hold PAIRING for more than 3 seconds.
The Bluetooth indicator blinks. »
4
On the device, set up the Bluetooth connection:
a Enable Bluetooth to search for other Bluetooth devices. (Refer to the
device user manual on how to enable the function.)
b When “ PHILIPS DC350” is recognized and displayed, select it to start to
connect.
c When prompted for a password, enter “0000”.
5
Wait until the Bluetooth indicator turns on.
The connection is complete. »
To connect more Bluetooth devices
1
Disconnect the currently-connected device. (see ‘Disconnect a device’ on page 22 )
2
Repeat the steps 1-5 in “Connect a device”.
Tip
If no connection is made within one minute, [FAILED] (failed) is displayed on the main unit. •
DC350_37.indd 21 DC350_37.indd 21 1/7/2009 1:59:06 PM 1/7/2009 1:59:06 PM