Philips DC350/37 - Manual (Page 22)

English
23 EN
Tip
To be heard more clearly, speak closer to the microphone. •
If an echo is heard, reduce the volume of the main unit. •
If you observe communication diffi culties, position the Bluetooth device closer to the main unit. •
Listen to music
Note
You can listen to audio through this unit from devices that support A2DP or AVRCP. •
As iPhone doesn’t support Bluetooth audio streaming, this unit doesn’t play audio fi les from •
iPhone through Bluetooth connection.
1
Connect the Bluetooth device. (see ‘Connect with a Bluetooth device’ on page 21 )
2
On the Bluetooth device, start play.
You hear the music through the unit. »
To pause/resume play, press • .
To skip to a track, press • / .
8 Other features
Set the alarm timer
You can set two alarms which go off at different time.
1
Ensure that you have set the clock correctly. (see ‘Set clock and date’ on page 16 )
2
Press and hold ALM 1 or ALM 2 on the main unit for 2 seconds.
Hour digits blink. »
[AL 1] (alarm 1) or [AL 2] (alarm 2) is displayed. »
3
Press / repeatedly to set the hour.
4
Press ALM 1 or ALM 2 to confi rm.
5
Press / repeatedly to set the minute.
6
Press ALM 1 or ALM 2 to confi rm.
7
Press VOL +/- to set a volume level for alarm tone.
The volume level is applied to two alarms. »
8
Press ALM 1 or ALM 2 to confi rm.
To set the other alarm, repeat the steps 2 -8. •
DC350_37.indd 23 DC350_37.indd 23 1/7/2009 1:59:07 PM 1/7/2009 1:59:07 PM