Polaris Sportsman 9920775 - Manual (Page 50)

47
FEATURES AND CONTROLS
Instrument Cluster
Rider Information Center
Standard Modes
The rider information center has 4 standard modes. The reverse override
button on the left handlebar is also the mode button.
NOTE: If using the mode button to program the rider information center, or to
toggle through the options, the transmission cannot be in reverse.
Mode 1 - Odometer
The odometer records the miles traveled by the ATV.
Mode 2 -Trip Meter
The trip meter records the miles traveled by the ATV on each trip if it's
reset before each trip. To reset the trip meter, select the trip meter mode.
Press and hold the mode button (override button) until the total changes
to 0.
NOTE: In the Rider Information Center, the trip meter display contains a deci-
mal point, but the odometer displays without a decimal point.
Mode 3 - Hour Meter
This mode logs the total hours the engine has been in operation.
Mode 4 - Tachometer
The engine RPM is displayed digitally.
NOTE: Small fluctuations in the RPM from day to day may be normal because
of changes in humidity, temperature, elevation and electrical loads.