Panasonic DIGA DMR-EA38V - Manual (Page 35)

35
RQT9058
S-VHS Quasi Playback (SQPB)
This unit can play tapes recorded in S-VHS.

Some picture noise may occur depending on the type
of tape used.
 It is not possible to fully obtain the high resolution
S-VHS is capable of.
 This unit cannot record in S-VHS.
Notes
Only works if there is at least 5 seconds blank space at the end of
the program.
When the tape reaches the end of the program, it will
automatically rewind to the beginning and play again.
Repeat Playback
During playback or while stopped
PLAY
Press and hold for about 5 or
more seconds.
– Repeat Playback goes on indefinitely until you
cancel it.
– The “RPt” indication appears on the unit’s display.
– Press [
 STOP] to stop play.
Tips
To remove the noise from a paused picture:
Start slow play (
34), then adjust the tracking.
Manual Tracking
During playback
TRACKING/V-LOCK
CH
or
TRACKING/V-LOCK
CH
– Repeat until the picture noise disappears.
To return to auto tracking:
TRACKING/V-LOCK
CH
(simultaneously).
The unit usually makes tracking adjustments
automatically, but you may need to do it manually if noise
appears on a tape recorded on other equipment.
Adjusting the playback picture
Adjust the vertical synchronization to stop the picture
from shaking while paused.
Vertical Locking Adjustment
Notes
 This function may not work with some tapes.
While paused
TRACKING/V-LOCK
CH
or
TRACKING/V-LOCK
CH
– Repeat until the shaking stops.
To return to the standard position:
TRACKING/V-LOCK
CH
(simultaneously).
Notes
 This function may not work with some tapes.
Stereo  Mono L  Mono R
 No display (Normal audio track) 
Changing Audio during Playback
AUDIO
A repeatedly, to select the audio
option.
Ad
v
anced Features