Panasonic DIGA DMR-EA38V - Manual (Page 57)

57
RQT9058
,  to select “Automatic” or
“Off”, then OK
On-screen Language
Perform step 1 of “Accessing the Setup Menu” ( 52).
Choose the language for these menus and the on-screen
messages.
,  to select “Display”, then 
,  to select “On-screen
Language”, then
OK
,  to select “English”,
“Español” or “Français”, then
OK
Front Display
Perform step 1 of “Accessing the Setup Menu” ( 52).
Changes the brightness of the unit’s display.
,  to select “Display”, then 
,  to select “Front Display”,
then
OK
,  to select “Bright”, “Dim” or
“Automatic”, then
OK
[Automatic] The display turns dark during playback. When the
unit is turned off, the unit’s display disappears.
While using this mode the standby power
consumption can be reduced.
Closed Caption
Perform step 1 of “Accessing the Setup Menu” ( 52).
Choose whether to show closed captions.
,  to select “Display”, then 
,  to select “Closed Caption”,
then
OK
,  to select “Set”, then
OK
,  to select “On”, then OK
– Select “Off” if you don’t want closed captions.
Closed Caption settings
After selecting “On” ( above, step 5).
,  to select “Analog”, then
OK
,  to select the item, then
OK
CC1 – 4 Information related to pictures (Appears at bottom of
screen)
T1 – 4 Textual information (Appears over entire screen)
Resets all settings for closed captions
After selecting “On” ( above, step 5).
,  to select “CC reset”, then
OK
Setting Men
us