ProForm PFANSY9825.1 - Manual (Page 13)

13
23. Wrap the Press Cable (109) around a 90mm
Pulley (63). Attach the Pulley, two Half Finger
Guards (66), a Cable Trap (68), and an M10
Washer (99) to the Left Seat Frame (27) with an
M10 x 103mm Bolt (22) and an M10 Nylon
Locknut (90).
Make sure the Cable Trap and the
Finger Guards are oriented as shown.
25. Wrap the Press Cable (109) around a 90mm
Pulley (63). Attach the Pulley, two Half Finger
Guards (66), a Cable Trap (68), and an M10
Washer (99) to the Left Upright (26) with an M10
x 108mm Bolt (72) and an M10 Nylon Locknut
(90).
Make sure the Cable Trap and Finger
Guards are oriented as shown.
26. Wrap the Press Cable (109) around a 90mm
Pulley (63). Attach the Pulley, two Half Finger
Guards (66), a Cable Trap (68), and an M10
Washer (99) to the Press Frame (29) with an M10
x 135mm Bolt (70).
Make sure the Cable Trap
and Finger Guards are oriented as shown.
24. Wrap the Press Cable (109) around a “V”-pulley
(62). Attach the “V”-pulley, two Half Finger Guards
(66), and two M10 Washers (99) to the Leg Press
Frame (28) with an M10 x 115mm Bolt (71) and
an M10 Nylon Locknut (90).
Make sure the
Finger Guards are oriented as shown.
23
24
25
26
90
99 66
63
109
66
68
22
27
66
66
99
109
99
62
90
28
71
66
66
90
72
26
109
63 99
68
70
66
109
66
29
68
63
99