Philips DVD 620 - Manual (Page 9)

9
English
Preparation
Basic Connections
● Please refer to the instruction books of your TV,
VCR, Stereo System or other devices as
necessary to make the best connections.
● Make one of the following connections,
depending on the capabilities of your existing
equipment.
The following guidelines are options for the best
picture and sound quality available on your DVD
player.
Picture
1
Use the CVBS Video Ouput for good picture
quality.
2
Use SCART Output for best picture quality.
Sound
1
Digital audio connections provide the clearest
sound. Connect one of the DVD player’s
DIGITAL AUDIO OUT (COAXIAL) to your
amplifier or receiver.
2
If digital connections are not possible, connect
the DVD player’s red and white AUDIO OUT to
your amplifier, receiver, stereo or TV.
Warning!
– Never make or change connections
with the power switched on.
– Connect the DVD player directly to
your TV, instead of eg. a VCR, to avoid
distortion because DVD video discs are
copy protected.
– Do not connect the DVD player AUDIO
OUT to PHONO IN of your amplifier or
receiver.
Connecting to a TV
1
Connect the SCART (TV OUT) to the
corresponding connector on the TV IN.
Note:
– Ensure that the “TV” indication on SCART
cable is connected to the TV set and “DVD”
indication on SCART cable is connected to the
DVD player.
If your TV is not equipped with a SCART input,
you can select the following connection:
If your TV has a CVBS Video input
connector,
1
Connect the CVBS VIDEO OUT on the DVD
player to the CVBS VIDEO IN.
2
Connect the Left and Right AUDIO OUT on the
DVD player to the Left and Right AUDIO IN on
the TV.
TO AUDIO IN TO VIDEO IN TO SCART IN
COAXIAL
DIGITAL AUDIO OUT
PCM-MPEG2-Dolby Digital
TV OUT L R (CVBS)
VIDEO OUT AUDIO OUT
OR
TO TV VCR
Connecting to an Audio System
1
You can also listen to the sound of audio CDs
and DVD video discs by connecting to an
optional stereo system.
2
Connect the Left and Right AUDIO OUT on the
DVD player to the Left and Right AUDIO IN on
the stereo system.
TO VIDEO IN TO SCART IN OR
AUDIO SYSTEM
TO AUDIO IN
COAXIAL
DIGITAL AUDIO OUT PCM-MPEG2-Dolby Digital
TV OUT L R (CVBS)
VIDEO OUT AUDIO OUT