Paxar Sierra Sport3 - Manual (Page 31)

Care & Maintenance 3-5
C l e a r i n g L a b e l J a m s
When you are printing and a jam occurs, a supply
error message appears. To clear the jam:
1. Turn off the printer by pressing and holding P
until the display is blank.
2. Pull the release levers located on both sides of
the printer to open the supply door.
3. If necessary, remove the roll of supplies.
4. Remove the jammed supplies and reload the
supply.
5. Close the supply door until the release levers click
into place.
6. Turn on the printer by pressing and holding P
until the display turns on.