Proxima ASA DP5800 - Manual (Page 6)

6
Input
menu
reset mute
zoom focus
power
temp lamp
S-VIDEO VIDEO AUDIO L R
AC SW
AC IN
AUDIO
IN
AUDIO
OUT
RGB IN
RGB OUT
CONTROL
Your DP5800 Projector
The remote control will function within
16 feet of the projector sensor and
within 30
°
to both the left and right.
Speaker
Handle
Cooling fan
(exhaust) Lens Cooling fan
(intake) Remote control
sensor
Remote control
sensor
INPUT button
To select the input source.
Each time this button is pressed, the input source is
changed in sequence as shown below.
RGB1
RGB2 VIDEO1 VIDEO2
RESET button
Resets unit to factory
settings.
LAMP indicator
Glows when the lamp
should be replaced.
(See page 11.)
ON indicator
Blinks in Standby mode.
Glows in operation mode.
(See page 11.)
VIDEO input terminal
(on video-equipped models only)
S-VIDEO input terminal
Mini DIN 4pin connector
VIDEO input terminal
RCA Jack
AUDIO L/R input terminal
RCA Jack
MAIN POWER switch
Main power ON/OFF switch.
RGB input terminal
RGB input terminal
D-sub 15 pin
RGB output
terminal
RGB output terminal
D-sub 15 pin
CONTROL terminal
D-sub 15 pin RS232
AC IN socket
Connect the provided
power cord.
AUDIO input
terminal
Stereo mini jack
AUDIO output
terminal
(RGB/VIDEO)
Stereo mini jack
TEMP Indicator
Glows when temperature
inside the projector is too
high. (See page 11.)
ZOOM buttons
Adjust picture size.
MUTE button
MENU button
Picture adjustments.
Refer to pages 12
−
16
for details.
STANDBY / ON
button
Power ON/OFF button.
OFF sets the unit in
Standby mode.
FOCUS button
Adjusts focus.