Proxima ASA DP5800 - Manual (Page 9)

9
Using the Projector
Projecting the picture
1
Turn the MAIN POWER switch of the projector on. [

: ON]
• The ON indicator will glow orange.
2
Press the STANDBY/ON button.
• The ON indicator blinks (green) and then glows (green).
3
Remove the lens cap.
4
Adjust the picture size using the ZOOM buttons.
5
Adjust the focus using the FOCUS buttons.
(1) Press the FOCUS button. The on-screen display shown on the right appears.
(2) Press the Focus +/- buttons until the picture is clear.
6
Turn on all connected equipment.
See pages 17-19 for the correct sequence for turning on various equipment.
7
Press the INPUT button or the INPUT SELECT (VIDEO or RGB)
button to select the source of the projected signal.
• The selected signal input source is displayed at the bottom right of the screen.
NOTE: Video 1/2 works with video capable units only.
+++
FOCUS
+++
RGB 1
5 4 7 2
1
7
4
2
5
3
RIGHT
STANDBY/ON
RISET
FOCUS ZOOM
TIMER
BLANK
POSITION MUTE
RGB1/2 VIDEO1/2
INPUT
VOL
MENU
RIGHT
RESET