Paxar TC6037EM - Manual (Page 13)

Using Supplies 3-1
L O A D I N G S U P P L I E S
The printer can use three types of supplies:
♦ Labels
♦ Tags
♦ Receipt Paper
There are two print modes. The way you load the supplies depends on
the print mode you use.
♦ Peel mode removes the backing paper from the supplies as it prints
the labels. This mode allows you to apply the label immediately. It is
only for labels. When using the on-demand sensor, you press the
trigger to print a label or the next label prints automatically when the
previous one is applied to a product.
♦ Non-Peel mode does not remove the backing paper. It is for labels
printed in a continuous strip, tags, or receipt paper.
L o a d i n g S u p p l i e s
To load supplies:
1. Turn on the printer. The application starts running.
2. Scroll through selections on the display until you are prompted to
load the supplies.
3