Patton electronic 1194 - Manual (Page 7)

7
2. Your telephone company may make changes to its facilities, equip-
ment, operations, or procedures that could affect the proper func-
tioning of your equipment. The telephone company will notify you in
advance of such changes to give you and opportunity to maintain
uninterrupted telephone service.
3. If your CSU causes harm to the telephone network, the telephone
company may temporarily discontinue your service. If possible, they
will notify you in advance, but if advance notice is not practical, you
will be notified as soon as possible and will be informed of your right
to file a complaint with the FCC.
4. If you experience trouble with the CSU, please contact Patton Elec-
tronics, Co. for service or repairs. Repairs should be performed only
by Patton Electronics Co.
5. You are required to notify the telephone company when you discon-
nect the CSU from the network.
1.6 CE NOTICE
The CE symbol on your Patton Electronics equipment indicates that it is
in compliance with the Electromagnetic Compatibility (EMC) directive
and the Low Voltage Directive (LVD) of the European Union (EU). A Cer-
tificate of Compliance is available by contacting Technical Support.
1.7 SERVICE
All warranty and non-warranty repairs must be returned freight prepaid
and insured to Patton Electronics. All returns must have a Return Materi-
als Authorization number on the outside of the shipping container. This
number may be obtained from Patton Electronics Technical Service at:
tel: (301)975-1007
E-mail: [email protected]
URL: www.patton.com
Note Packages received without an RMA number will not be
accepted.
Patton Electronics’ technical staff is also available to answer any questions
that might arise concerning the installation or use of your Model 1194.
Technical Service hours:
8AM to 5PM EST, Monday through Friday .