Pacific Cycle CUCINA HR7633 - Manual (Page 19)

30
P
ART
4
-
SER
VICING
Correct routine maintenance of your new bike will ensure:
Smooth running - Longer lasting components - Safer riding - Lower running costs
Every time you ride your scooter, its condition changes. The more you ride, the more frequently maintenance will be
required. We recommend you spend a little time on regular maintenance tasks. The following schedules are a useful guide
and by referring to Part 5 of this manual, you should be able to accomplish most tasks. If you require assistance, we
recommend you see a scooter specialist.
Weekly
Every Six Months
Yearly
brake calipers
brake levers
brake cables
wheel bearings
headset
oil
oil
lithium based grease
lithium based grease
lithium based grease
3 drops from oil can
2 drops from oil can
disassemble
disassemble
disassemble
Schedule 1 - Lubrication
Note: The frequency of maintenance should increase with use in wet or dusty conditions. Do not over
lubricate - remove excess lubricant to prevent dirt build up. Never use a degreaser to lubricate your chain (WD-40™)
Component Frequency Lubricant How to Lubricate
29
Final Check
Install any additional parts that are supplied with your bike.
NOTE: Your scooter may be equipped with different style components than the ones illustrated.
Reflectors: Attach the white reflector to the front bracket and the red reflector to the rear bracket using an 8mm
wrench or a Phillips head screwdriver. Attach the brackets to the scooter using the hardware provided. For some models,
the front reflector bracket will be mounted on the front brake assembly bolt that fits through the fork. It is important to
make sure all connections are tightened securely and that the reflectors are properly angled.
Tire Pressure: Check tire pressure, inflate to the range recommended on the tire sidewalls.
Pegs: There are many different types of pegs-too many to deal with individually in this manual.
Please see your dealer for specific information regarding peg installation.
Before riding, ensure all nuts, bolts and fittings
on the scooter have been correctly tightened.