Pacific Cycle CUCINA HR7633 - Manual (Page 5)

02
Your new scooter was assembled and tuned in the factory and then partially disassembled for shipping.
You may have purchased the scooter already fully assembled and ready to ride OR in the shipping carton in
the partially disassembled form. The following instructions will enable you to prepare your scooter for years
of enjoyable scooter riding. For more details on inspection, lubrication, maintenance and adjustment of any
area please refer to the relevant sections in this manual. If you have questions about your ability to properly
assemble this unit, please consult a qualified specialist before riding. If you need replacement parts or have
questions pertaining to assembly of your scooter, call the service line direct at:
SERVICE AND TECHNICAL SUPPORT:
1.800.626.2811
Monday - Friday 8:00 a.m. - 5:00 p.m. Central Time.
Tools Required:
•
Phillips head screw driver
•
4mm, 5mm 6mm & 8mm Allen keys
•
Adjustable wrench or a 9mm, 10mm,
14mm & 15mm open and box end wrenches
•
A pair of pliers with cable cutting ability
To avoid injury, this product must be properly assembled before use. If your scooter was
obtained assembled, we strongly recommend that you review the complete assembly
instructions and perform checks specified in this manual before riding.
01
SCHWINN STINGRAY SCOOTER BASIC PARTS BREAKDOWN
Brake Lever
Upper Fork Crown
Lower Fork Crown
Fork Leg
Front Fender
Front Wheel
Grips
Handlebar
Stem
Rear Fender
Frame
Deck
Kickstand
Rear Wheel