Philips CTS4000/05 - Manual (Page 23)

English
EN 23
Pla
y
Access DVD menu
1
Press DISC to access disc main menu.
2
Select a play option, then press OK.
In some menus, press • number buttons
to input your selection.
To return to the title menu during
•
playback, press MENU.
Access VCD menu or preview menu
The PBC (Playback Control) for VCD is turned
on by default in the factory. When you load in a
VCD, the contents menu is displayed.
1
Press vV to select a play option, then
press OK to start play.
If PBC is off, it skips the menu and starts •
play from the fi rst title.
During playback, you can press
• MENU
to return to the menu (if the PBC
mode is on).
2
To preview the contents of the disc, press
DISC.
To exit the menu, press • DISC.
Select Digest Type:
Track Digest
Disc Interval
Track Interval
[ Track Digest ]
It plays the fi rst few seconds of each track
in a disc.
[ Disc Interval ]
It divides the total disc time by six and
plays the fi rst few seconds of these
intervals.
[ Track Interval ]
It divides the current track by six and plays
the fi rst few seconds of these intervals.
This option is not available in stop •
mode.
3
Select a preview play option, then press
OK.
Tips
The default setting for PBC is on. To change the •
default setting, see chapter ‘Adjust settings’ -
[ Preference Setup ] > [ PBC ] for details.
1_cts4000_12_eng3.indd 23 1_cts4000_12_eng3.indd 23 10/6/2008 10:53:58 AM 10/6/2008 10:53:58 AM