Philips CTS4000/05 - Manual (Page 36)

36 EN
l h h d i i f
[ Audio ]
Select the default audio language for
DVDs.
[ Subtitle ]
Select the default subtitle language for
DVDs.
[ Disc Menu ]
Select the menu language for DVDs.
Note
If the language you have set is not available on the •
disc, the disc uses its own default language.
For some DVDs, the subtitle/audio language can only
•
be changed from the disc menu.
To select the languages that are not listed in the
•
menu, select [ Others ]. Then check the Language
Code list at the back of this user manual and enter
the respective 4-digit language code.
[ Parental ]
Restrict access to DVDs that are unsuitable
for your children. These types of DVDs
must be recorded with ratings.
To start, press 1. OK.
Select a rating level in the menu, then 2.
press OK.
Press the
3. number buttons to enter
your 4-digit password.
Note
Rated DVDs above the level you set in • [ Parental ]
require a password to be played.
The ratings are country-dependent. To allow all discs
•
to play, select ‘8’.
Some DVDs have ratings printed on them but are
•
not recorded with ratings. This function has no effect
on such DVDs.
Tips
To set or change your password, go to •
[ Preference Setup ] > [ Password ].
[ PBC ]
For VCDs/SVCDs recorded with PBC
(playback control), you can access the disc
content through an interactive menu.
[ • On ] – an index menu is displayed
when you load a disc for play.
[ Off ]
• – skip the menu and start play
from the fi rst title.
[ MP3/JPEG Nav ]
Turn off or on MP3/WMA folder display
when you play a media that contains MP3/
WMA fi les.
[ • With Menu ] – display the folders of
MP3/WMA fi les.
[ Without Menu ]
• – display all the fi les.
[ Password ]
Follow the instructions on the TV to set or
change the password for locked discs and
play restricted DVDs.
Old Password
New Password
Confirm PWD
OK
Change Password
Press the 1. number buttons to
enter ‘0000’ or your last set 4-digit
password at [ Old Password ] fi eld.
Enter the new password at
2. [ New
Password ] fi eld.
Enter the new password again at
3.
[ Confi rm PWD ] fi eld.
Press
4. OK to exit the menu.
Note
If you forget your 4-digit password, enter ‘0000’ •
before you set a new password.
1_cts4000_12_eng3.indd 36 1_cts4000_12_eng3.indd 36 10/6/2008 10:53:59 AM 10/6/2008 10:53:59 AM