Panasonic AJ-D455P - Manual (Page 35)

35
USER menu
<AUDIO>
Item Setting
No.
Superimposed
No.
Superimposed Description
display display
700 CH1 IN 0000 4dB
LV 0001 0dB
0002 –20dB
0003 –60dB
701 CH2 IN 0000 4dB
LV 0001 0dB
0002 –20dB
0003 –60dB
703 CH1 OUT 0000 4dB
LV 0001 0dB
0002 –20dB
704 CH2 OUT 0000 4dB
LV 0001 0dB
0002 –20dB
714 REC CH1 0000 CH1
0001 CH2
0002 CH1+2
715 REC CH2 0000 CH1
0001 CH2
0002 CH1+2
716 REC CUE 0000 CH1
0001 CH2
0002 CH1+2
718 DV 0000 ST1
OUTPUT 0001 ST2
0002 ST1+2
719 PB FADE 0000 AUTO
0001 CUT
0002 FADE
The underline on the setting item denotes the initial setting.
This selects the audio input (CH1) reference level switching.
This selects the audio input (CH2) reference level switching.
This selects the audio output (CH1) reference level switching.
This selects the audio output (CH2) reference level switching.
This selects the input signal to be recorded on the audio CH1
track.
0: Audio input CH1 signal.
1: Audio input CH2 signal.
2: Mixed audio input CH1 and CH2 signal.
This selects the input signal to be recorded on the audio CH2
track.
0: Audio input CH1 signal.
1: Audio input CH2 signal.
2: Mixed audio input CH1 and CH2 signal.
This selects the input signal recorded in CUE.
0: The signal selected by SETUP-MENU No. 714 is recorded.
1: The signal selected by SETUP-MENU No. 715 is recorded.
2: The signal selected by SETUP-MENU No. 714 and No. 715
are mixed and recorded.
This selects the AUDIO CH1 and CH2 output signals during
DV or DVCAM format playback.
0: The CH1 track signals are output to CH1 and the CH2 track
signals to CH2. (Only the sound during shooting is output.)
1: The CH3 track signals are output to CH1 and the CH4 track
signals to CH2. (Only the audio dubbing sound is output.)
2: The mixed CH1 and CH3 track signals are output to CH1
and the mixed CH2 and CH4 track signals to CH2. (The
sound during shooting and audio dubbing sound are output
simultaneously.)
<Note>
This menu item takes effect only when a DV or DVCAM
cassette tape with a 32 kHz/4-channel recording is played
back.
This selects the processing method for the audio edit points
(IN point, OUT point) during playback.
0: According to the status during recording. (Setup menus
No. 309, 310)
1: Forced CUT
2: Forced FADE