Panasonic TG7200-7220E - Manual (Page 27)

Answering System Features
27 Helpline Tel. No.: U.K. 0844 844 3898 R.O.I. 01289 8333
Important:
L
In order to operate the answering
system remotely, you must first turn
on remote operation by setting a
remote access code. This code must
be entered each time you operate the
answering system remotely.
Turning remote operation on
A 3-digit remote access code must be
entered when operating the answering
system remotely. This code prevents
unauthorised parties from listening to
your messages remotely.
1
{j /OK}
2
{^} /{V}: “Answer System” i
{>}
3
{^} /{V}: “Settings” i {>}
4
{^} /{V}: “Remote Code” i {>}
5 To turn on remote operation, enter a
3-digit remote access code.
L
To turn off remote operation,
press {*}.
6
{j
/OK} i {ih}
Using the answering system
remotely
1
Dial your phone number from a
touch-tone phone.
2 After the greeting message starts,
enter your remote access code.
L
The unit will announce the
number of new messages.
L After 3 seconds, voice guidance
starts.
3 Follow the voice guidance prompts
as necessary.
Note:
L
You can hang up at any time.
Voice guidance
During remote operation, the unit’s voice
guidance will prompt you to press {1} to
perform a specific operation, or press
{
2} to listen to more available
operations.
Remote commands
You can press dial keys to access
certain answering system functions
without waiting for the voice guidance to
prompt you.
Key Operation
{ 1} Repeat message (during
playback)
*1
{ 2} Skip message (during
playback)
{ 4} Play new messages
{ 5} Play all messages
{ 6} Play greeting message
{
7} Record greeting
message
{ 9} Stop (recording,
playback)
{ 0} Turn answering system
off
{*}{ 4} Erase currently playing
message
{*}{ 5} Erase all messages
{*}{ 6} Erase greeting message
(during greeting message
playback)
{*}{ #} End remote operation (or
hang up)
*1 If pressed within the first 5
seconds of a message, the
previous message will be played.
TG7200-7220E(e).book Page 27 Tuesday, May 22, 2007 9:34 AM