Polaris Magnum 330 2x4 - Manual (Page 82)

79
MAINTENANCE AND LUBRICATION
Rear Gearcase Oil
Oil Check
Always check and change the rear
gearcase oil at the intervals outlined in
the Periodic Maintenance Chart
beginning on page 68. Maintain the rear
gearcase oil level at the bottom of the
fill hole threads (1). We recommend the
use of Polaris Premium ATV Angle
Drive Fluid. Refer to the gearcase
specifications chart on page 76. See
page 108 for the part numbers of Polaris
products.
1. Position the ATV on a level surface.
2. Remove the gearcase fill plug (2)
and check the oil level.
3. Add the recommended oil as needed.
4. Reinstall the fill plug. Torque to
specification.
5. Check for leaks.
Oil Change
1. Remove the drain plug (3) located on the bottom of the gearcase.
Catch and discard the used oil properly.
2. Clean and reinstall the drain plug with a new sealing washer.
Torque to specification.
3. Remove the fill plug and add the recommended gearcase oil.
4. Reinstall the fill plug. Torque to specification.
5. Check for leaks.
1
3
2