Philips CD280 - Manual (Page 11)

11 EN
Install the handset
Caution
Risk of explosion! Keep batteries away from •
heat, sunshine or fire. Never discard batteries
in fire.
Use only the supplied batteries. •
Risk of decreased battery life! Never mix •
different brands or types of batteries.
Warning
Check the battery polarity when inserting in •
the battery compartment. Incorrect polarity
may damage the product.
The batteries are pre-installed in the handset.
Pull the battery tape off from the battery door
before charging.
Configure your phone
(country dependent)
1
When using your phone for the first time,
you see a welcome message.
2
Press [OK].
Set the country/language
Select your country/language, then press [OK]
to confirm.
The country/language setting is saved. »
Note
The country/language setting option is •
country dependent. If no welcome message
is displayed, it means the country/language
setting is preset for your country. Then you
can set the date and time.
Set the date and time
Tip
To set the date and time later, press • [Back] to
skip this setting.
1
Select [Menu] > [Phone setup] > [Date
& time], then press [OK] to confirm.
2
Press the numeric buttons to enter the
date, then press [OK] to confirm.
The time setting menu is displayed on »
the handset.
3
Press the numeric buttons to enter the
time.
Note
If the time is in 12-hour format, press • / to
select [AM] or [PM].
4
Press [OK] to confirm.
English