Pantech Reveal - Manual (Page 32)

30
2. Press Recent Calls > Call Time .
3. Press U/D to view Last Call , Received Calls , Dialed
Calls and Total Calls .
Resetting all call times
1. Press Shortcuts in standby mode or press Menu > My
Stuff > Tools .
2. Press Recent Calls > Call Time .
3. Press Reset > Yes .
4. Enter password > @.
note: The default password is ‘1234’.
Viewing data transmitted information
1. Press Shortcuts in standby mode or press Menu > My
Stuff > Tools .
2. Press Recent Calls > Packet Counter .
• Current Info : You can view transmitted data in the current
session, in Kbytes. Sent , Received and Total information
are also available.
• Last Info : You can view Sent , Received , Total and
Duration information of the previous session’s transmitted
in Kbytes.
• Total Info : You can view all the Sent , Received , Total
and Duration transmitted data in Kbytes.
• Clear Logs: The default password is ‘1234’.
Speed dialing
You can dial quickly using speed dialing. Up to 8 phone
numbers can be programmed using numbers 2 to 9.
1 : Voice mail
0 : Prefix for international call
Setting speed dial
1. Press Menu > Address Book > Speed Dial .
2. Select an empty entry and press Add .
3. Select a person and press @ or Select .
Changing speed dialing person
1. Press Menu > Address Book > Speed Dial .
2. Select a number > Change or @ .
3. Select a person > @ or Select .
Removing from speed dial
1. Press Menu > Address Book > Speed Dial .
2. Select a number > Delete .