Pantech Reveal - Manual (Page 34)

32
Caller identification
Caller identification N
1. Press Menu > Settings > Call > Display My Number .
2. Select Network Default , Show or Hide > Select .
Using your headset
You can send or receive a call using your headset.
When you connect your headset to the jack the button on the
headset works as follows.
note: You need to use the headset designed for this device,
and it is optional item. Also not every headset has a button.
While in standby mode
1. Press the button once to list recent calls.
2. Press the button twice to redial the last call.
While the phone is closed
1. Press the button once to receive a call.
2. Press the button once to end the call.
Service numbers and fixed
dialing
Calling your service numbers S
You can see the service number to reach the service provider.
1. Press Menu > Address Book > Service Numbers .
2. Select a number > press E.
Viewing the fixed dialing list
Fixed dialing is a service that limits your access to specific
numbers in the address book list recorded on the SIM. Input the
PIN2 to set up or cancel this service.
1. Press Menu > Address Book > FDN List .
2. Select a number > press E.
note: PIN2 must be correctly entered within 3 attempts. If
you input the incorrect code three times in a row the PIN2
code will be blocked. If the PIN2 code is blocked please
contact your service provider. PIN2 code supplied with the
SIM card.