ParaBody 435104 - Manual (Page 11)

11
STEP 11
DETAIL 11 FIGURE 11
SEE DETAIL 11
LEG
CABLE
LAT
CABLE
PRESS
CABLE
D-RING
• Run the LEG PRESS CABLE through the correct hole on the d-ring and attach one KEYHOLE CLEVIS to the end of the LEG PRESS
CABLE. See FIGURE 11 & DETAIL 11. (NOTE: If the 445101 SECOND STACK kit is installed, evenly space the LAT & LEG EXT.
CABLES on the D-RING)
FIGURE 12
STEP 12
LEG PRESS CABLE
• Assemble one 72” ELASTIC CORD (7) to the KEYHOLE CLEVIS (4)
as shown in FIGURE 12.
7
8
4
LEG
PRESS
CABLE
8
4